Jig Clamps

 These jig clamps are great for curing your jigs.  By standing your jigs vertically instead of hanging them by the hook during curing, prevents the paint from creating cone heads on the jigs.  The paint will run down towards the shank of the hook instead of going to the top of the jig. They are made from extruded aluminum and have a high temp rubber strip to securely hold the jig hooks.  The 6" length is perfect for use in toaster ovens.  To use, simply pop the closing clasps off the clamp with a screw driver, load the jigs, and replace the jig clamp.  The clamp comes with 2 closing claps (I usually only use 1).

Note: The jig clamps only open about a 1/4"

larger image		 6" Jig Clamp
 $12.99 each
#90-30-01

Select Quantity:

 

12" Jig Clamp
 $25.49 each
#90-30-02

Select Quantity:

 

Click to return to home page.